
You are staring at a kitchen that needs to be gutted. Or a basement that has to become a livable space. Maybe you are building an addition from scratch. The plans are done, the vision is clear, and then reality hits. Who actually runs this thing? Who calls the plumber? Who pulls the permit? Who makes sure the electrician and the drywall guy do not show up on the same day and trip over each other? That is where a general contractor comes in. This guide from Ardson Construction breaks down exactly what a general contractor does, when you need one, and how to hire the right one without getting burned.
What Is a General Contractor in Plain English?
A general contractor is the person or company that takes full responsibility for running your construction or renovation project from start to finish. They hold the contract with you, hire and manage every subcontractor, pull the permits, schedule inspections, and make sure the work matches the plans and the building code. One point of contact. One person accountable.
Think of it this way. You do not hire a conductor and then tell the violins when to come in. You hire the conductor, and the conductor runs the orchestra. A general contractor is your project’s conductor.
What Does a General Contractor Actually Do on a Daily Basis?
A general contractor does far more than swing a hammer. Their day is a mix of planning, problem-solving, people management, and paperwork. The job breaks down into several core responsibilities.
Pre-Construction Planning and Permits
Before anyone touches a tool, a general contractor reviews the plans and looks for conflicts. A plumbing line that runs through a planned beam. A window that blocks an electrical panel. Problems caught on paper cost nothing. Problems caught on site cost thousands. The general contractor also pulls the building permits, which is a legal step most homeowners underestimate. In most jurisdictions, the general contractor is legally responsible for verifying that all permits are obtained and that the work complies with approved plans and codes.
Hiring and Managing Subcontractors
A general contractor does not do every trade personally. They hire licensed plumbers, electricians, framers, HVAC techs, and finishers. Then they schedule those trades in the correct sequence. You cannot install drywall before the rough electrical inspection. You cannot tile before the waterproofing passes. A general contractor knows the order and holds each subcontractor to the schedule and quality standard. When work fails inspection, the general contractor has the leverage to bring the subcontractor back and fix it at no extra cost to you.
Budget, Timeline, and Site Supervision
A general contractor tracks every dollar against the budget. They flag scope changes before they happen and document change orders properly. Someone with construction knowledge is on-site daily to catch corner-cutting before it becomes a water damage claim. The general contractor also manages the project timeline and communicates progress to you.
Material Procurement and Cost Control
General contractors buy materials at contractor pricing. That is typically 10 to 20 percent below retail. On a $100,000 project, that alone can save $10,000 to $20,000. That savings often offsets a large chunk of the general contractor’s fee.
How Much Does a General Contractor Cost?
General contractors typically charge 10 to 20 percent of the total project cost as their fee. On a $200,000 project, that is $20,000 to $40,000. Daily rates for construction management range from $300 to $500.
| Project Type | General Contractor Free | Why You Need One |
| Full home build | 10–20% of cost | Dozens of trades, permits, inspections |
| Kitchen or bath remodel | 10–20% of cost | Plumbing, electrical, and sequencing |
| Room addition | 10–20% of cost | Structural work and multiple inspections |
| Single-trade repair | No general contractor needed | Hire the trade directly |
| Cosmetic refresh | No general contractor needed | Paint and fixtures are manageable |
That fee sounds steep until you price out the alternative. Homeowners who self-manage often lose money on return-trip fees, rework, and material markups they cannot access.
Do You Actually Need a General Contractor?
You need a general contractor when your project involves multiple trades, structural work, plumbing or electrical changes, or permits. You can skip the general contractor when the scope is simple and stays within one trade. A powder room refresh, new flooring, or a paint job does not need a general contractor. A bathroom gut renovation absolutely does.
Here is the simplest rule. If one trade’s mistake can block three other trades, you need a general contractor. If the plumber installs the wrong valve before tile goes up, fixing it means opening a wall. That is the kind of sequencing problem a general contractor exists to prevent.
What Should You Ask Before Hiring a General Contractor?
- Ask these questions before you sign anything.
- Are you licensed and insured for this exact type of work?
- Can you show me three recent projects of similar scope?
- Who is my main point of contact, and how often will we communicate?
- What is your payment schedule, and how are change orders handled?
- What hidden conditions worry you on a project like mine?
Get at least three bids. Check license and insurance certificates directly. Ask for references and actually call them. A general contractor who quotes low and manages poorly is the most expensive contractor you will ever hire.
Why Homeowners Choose Ardson Construction for Their Projects
At Ardson Construction, we handle the permits, the subcontractors, the schedule, and the paperwork. You get one point of accountability and a clear line of communication from the first walkthrough to the final punch list. We are licensed and insured, and we run projects the way they should be run: on schedule, on budget, and to code. Reach out today to talk about your project and get a realistic plan.
FAQs
Q1: Can I act as my own general contractor?
Yes, in many jurisdictions homeowners can act as their own general contractor. But you take on all the legal responsibility for permits, code compliance, and work performed under the permit. You also become the person calling trades, scheduling inspections, and solving every problem. It works for small, simple projects. It rarely works for complex renovations.
Q2: What is the difference between a general contractor and a subcontractor?
A general contractor holds the main contract with you and manages the entire project. A subcontractor is hired by the general contractor to perform a specific trade, like plumbing or electrical. The general contractor is the manager. The subcontractors are the specialists.
Q3: Does a general contractor need to be licensed and insured?
Yes. A licensed general contractor carries general liability insurance and workers’ compensation. If a subcontractor gets injured on your property without a general contractor’s coverage in place, you could be held liable. Always verify license and insurance before work begins.
Q4: How long does a typical home renovation take with a general contractor?
Timelines vary by scope. A bathroom remodel might take two to four weeks. A kitchen can take six to ten weeks. A full addition or whole-home renovation runs three to six months or more. A good general contractor provides a realistic schedule and updates you when things change.
Q5: What happens if the work fails inspection?
The general contractor is responsible for correcting it. A licensed general contractor has leverage with subcontractors to bring them back and fix failed work. That is one of the main reasons to hire a general contractor instead of managing trades yourself. The general contractor owns the outcome.

